AAFES MEMBERS NOW SAVE EVEN MORE. PREVIOUS MAP (min price) ITEMS ARE NOW DISCOUNTED!!

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Mastervolt

Mastervolt Alternator Temperature Sensor Mastervolt Alternator Temperature Sensor
Online
$12.58for Each
Mfr PN: 41500400
Stock: 1

Alternator Temperature Sensor

When using the Alpha Pro in combination with non-Mastervolt alternators, this alternator temperature sensor may offer additional protection against over heating.

Online
$12.58for Each
Mfr PN: 41500400
Stock: 1

Mastervolt Battery Mate 1602 IG Isolator - 120 Amp, 2 Bank Mastervolt Battery Mate 1602 IG Isolator - 120 Amp, 2 Bank
Online
$356.10for Each
Mfr PN: 83116025
Stock: 6
Battery Mate 1602 IG Isolator - 120 Amp, 2 Bank

The Battery Mate is the ultimate solution for charging several batteries simultaneously and is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than conventional battery isolators. This ensures fast and complete charging of your batteries without having to make additional adjustments to the alternator.

While battery isolators are conventional diode splitters, the Battery Mate's technology is electronic and includes mosfets (transistors). Its components compensate for variations in voltage and ensure that charging continues at the right voltage level, even with several battery banks. The input side on the Battery Mate is connected to the alternator and/or battery charger, while two batteries are connected to the output side. The Battery Mate is easy to install on a DIN rail (industry standard).The Mastervolt Battery Mate can be used in any application even if the standard alternator need external excitation or voltage sensing. In this case the additional IG contact can be connected.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$356.10for Each
Mfr PN: 83116025
Stock: 6

Mastervolt Battery Mate 1603 IG Isolator - 120A, 3 Bank Mastervolt Battery Mate 1603 IG Isolator - 120A, 3 Bank
Online
$399.04for Each
Mfr PN: 83116035
Stock: 4
Battery Mate 1603 IG Isolator - 120 Amp, 3 Bank

The Battery Mate is the ultimate solution for charging several batteries simultaneously and is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than conventional battery isolators. This ensures fast and complete charging of your batteries without having to make additional adjustments to the alternator.

While battery isolators are conventional diode splitters, the Battery Mate's technology is electronic and includes mosfets (transistors). Its components compensate for variations in voltage and ensure that charging continues at the right voltage level, even with several battery banks. The input side on the Battery Mate is connected to the alternator and/or battery charger, while two batteries are connected to the output side. The Battery Mate is easy to install on a DIN rail (industry standard).The Mastervolt Battery Mate can be used in any application even if the standard alternator need external excitation or voltage sensing. In this case the additional IG contact can be connected.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$399.04for Each
Mfr PN: 83116035
Stock: 4

Mastervolt Bosch Adapter Cable Mastervolt Bosch Adapter Cable
Online
$14.53for Each
Mfr PN: 45510500
Stock: 0

Bosch Adapter Cable

Connection cable for any other brand of alternator that has a standard Bosch connector.

Online
$14.53for Each
Mfr PN: 45510500
Stock: 0

Mastervolt ChargeMaster 20 Amp Battery Charger - 3 Bank, 24V Mastervolt ChargeMaster 20 Amp Battery Charger - 3 Bank, 24V
Online
$601.01for Each
Retail $685.95
Mfr PN: 44020200
Stock: 0
ChargeMaster 20 Amp Battery Charger - 3 Bank, 24V

Power you can rely on.

Always on course with Mastervolt...

Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.

ChargeMaster Battery Chargers

Make the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt's ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection. You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.

Features:
  • 3-Step+ charging technology for fast and complete charging
  • Safe and complete charging due to standard safety features
  • Memory function prevents overcharging in case of an unstable power supply
  • Clear control panel
  • Easy to install
  • Built-in system functionality (MasterBus) in combination with other Mastervolt products

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$601.01for Each
Retail $685.95
Mfr PN: 44020200
Stock: 0

Mastervolt ChargeMaster 25 Amp Battery Charger - 3 Bank, 12V Mastervolt ChargeMaster 25 Amp Battery Charger - 3 Bank, 12V
Online
$370.17for Each
Retail $422.49
Mfr PN: 44010250
Stock: 4
ChargeMaster 25 Amp Battery Charger - 3 Bank, 12V

Power you can rely on.

Always on course with Mastervolt...

Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.

ChargeMaster Battery Chargers

Make the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt's ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection. You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.

Features:
  • 3-Step+ charging technology for fast and complete charging
  • Safe and complete charging due to standard safety features
  • Memory function prevents overcharging in case of an unstable power supply
  • Clear control panel
  • Easy to install
  • Built-in system functionality (MasterBus) in combination with other Mastervolt products

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$370.17for Each
Retail $422.49
Mfr PN: 44010250
Stock: 4

Mastervolt ChargeMaster Plus 12/100-3 CZone/MBus Mastervolt ChargeMaster Plus 12/100-3 CZone/MBus
Online
$1653.54for Each
Retail $1653.54
Mfr PN: 44311005
Stock: 0

ChargeMaster Plus 12/100-3 CZone/MBus

ChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges a maximum of three batteries in a fast and safe way and works anywhere in the world.

Battery’s Best Friend

With the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method. Other unique features are:

  • Revival mode: automatically revives even fully depleted batteries.
  • Priority Charge: redirect available power to the lowest battery, for faster charging.
  • Smart Input: charge all three batteries from one single alternator for continuous charging on the go.

Global Charging

The ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, the ChargeMaster Plus is CE, ABYC, UL, SAE, CEC and RCM/C-Tick compliant.

System Simplicity

Nowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of all three outputs in an understandable way. Robust and ergonomic connections save installation time. An integrated VSR eliminates the need for additional components and ensures that the alternators energy is funnelled through to the batteries.

Powerful Connections

In modern applications, all components work together, the ChargeMaster Plus supports not only MasterBus but also CZone and NMEA. This enables the charger to communicate with displays, shunts and power systems including communication standards like, FireCan, CANopen and many more. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.

Features:

  • MasterBus, CZone and NMEA communication.
  • Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR.
  • Combine Lithium Ion, Gel or AGM, and large or small battery banks on a single battery charger.
  • Charges multiple batteries while being underway.
  • Extended specifications: offers 20 % more output at 14.4 V and 80 % charging power at 60 °C.
  • Safe Charge: quickly recognize the State of Charge for extended battery life.
  • Very wide operating range of 80-275 V AC, 35-70 Hz.
  • Compact, easy to connect and quick to install.

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$1653.54for Each
Retail $1653.54
Mfr PN: 44311005
Stock: 0

Mastervolt ChargeMaster Plus 24V, 60A, 3-Bank, NMEA2000 - CZone Mastervolt ChargeMaster Plus 24V, 60A, 3-Bank, NMEA2000 - CZone
Online
$1343.73for Each
Retail $1526.97
Mfr PN: 44320605
Stock: 3

ChargeMaster Plus 24V, 60A, 3-Bank, NMEA2000 - CZone

ChargeMaster Plus 24/60-3 CZone

All-in-one solution for faster and safer charging

ChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of two or three batteries in a fast and safe way and works anywhere in the world.

With the new Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method. Other unique features are:

  • Revival mode: automatically revives even fully depleted batteries.
  • Multi voltage: charge 12 V starter battery in a 24 V system, without additional components.
  • Priority Charge: redirect available power to the lowest battery, for faster charging.
  • Smart Input: charge all three batteries from one single alternator for continuous charging on the go.

Global Charging

The ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, the ChargeMaster Plus is CE, ABYC, UL, SAE, CEC/DOE and RCM/C-Tick compliant.

System Simplicity

Nowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of all outputs in an understandable way. Robust and ergonomic connections save installation time. An integrated VSR eliminates the need for additional components and ensures that the alternators energy is funnelled through to the batteries.

Powerful Communications thanks to CZone integration

In modern applications, all electrical components work together. The CAN-based MasterBus enables the ChargeMaster Plus to communicate with displays, shunts and power systems including communication standards like CZone®, NMEA 2000 and CANopen (through additional interfaces).

Models with the addition CZone do not only support MasterBus, but also support CZone and NMEA 2000 communication, without the need of additional interfaces. This ChargeMasters Plus series can be configured via MasterBus or will accept a CZone configuration file just like any other CZone device. Other communication standards like ModBus, CANopen, LinBus, etc. are supported via additional interfaces.

This wide range of communication interfaces makes the ChargeMaster Plus ideally suited for system integration. In addition, the ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.

Features:

  • Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR.
  • Combine Lithium Ion, Gel or AGM, and large or small battery banks on a single battery charger.
  • Charges multiple batteries while being underway.
  • Extended specifications: offers 20 % more output at 14.4 V and 80 % charging power at 60 °C.
  • Safe Charge: quickly recognize the State of Charge for extended battery life.
  • Very wide operating range of 80-275 V AC, 35-70 Hz.
  • Compact, easy to connect and quick to install

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$1343.73for Each
Retail $1526.97
Mfr PN: 44320605
Stock: 3

Mastervolt CombiMaster 12V - 3000W - 160 Amp (120V) Mastervolt CombiMaster 12V - 3000W - 160 Amp (120V)
Online
$1550.11for Each
Retail $1550.11
Mfr PN: 35513000
Stock: 0

CombiMaster 12V - 3000W - 160 Amp (120V)

Designed with the customer in mind and using the latest technology, the CombiMaster range is all about user-friendliness and reliability. But don’t let that friendly appearance misguide you: the powerful CombiMaster range drives even the heaviest and most sensitive loads with ease!

With the CombiMaster, power dips and failures belong to the past. The automatic AC transfer system switches between generator or mains and inverter output, ensuring a constant power supply. Its Power Assist function prevents tripping of the mains fuse in case you’re connected to a weak land line or small generator.

The CombiMaster range delivers unmatched performance and value for money. As you would expect from Mastervolt, the CombiMaster is completed with MasterBus, CZone and NMEA 2000 compatible communication, allowing for a broad range of monitoring and system integration options.

Features:

  • Most compact and lightweight Combi in its class.
  • Reliable, hum-free and longer operation from your batteries.
  • Starts even the heaviest and most sensitive loads.
  • Intelligent 3-step+ battery charger for faster and safer charging.
  • Automatic switching between mains and inverter mode.
  • Power Assist prevents blown mains fuses.
  • Generator compatible.
  • Integrated CZone*, MasterBus and NMEA 2000 communication.
  • Quick installation with heavy duty connections.
  • E-mark certified.

Remote Control & Monitoring Options:

  • MasterBus compatible via SmartRemote or EasyView 5 display.
  • CZone* / NMEA 2000 compatible via Touch 5 or Touch 10 display.
  • NMEA 2000 compatible via 3rd party multifunctional display

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$1550.11for Each
Retail $1550.11
Mfr PN: 35513000
Stock: 0

Mastervolt CZone Drop Cable - 1M Mastervolt CZone Drop Cable - 1M
Online
$12.73for Each
Retail $15.70
Mfr PN: 77060100
Stock: 0

CZone Drop Cable - 1M

Adapter cable for connecting Mastervolt devices with CZone support to the CZone or NMEA 2000 network. 

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$12.73for Each
Retail $15.70
Mfr PN: 77060100
Stock: 0

Mastervolt DC Master 24V to 12V Converter - 12 Amp Mastervolt DC Master 24V to 12V Converter - 12 Amp
Online
$107.65for Each
Retail $122.87
Mfr PN: 81400300
Stock: 3
DC Master 24V to 12V Converter - 12 Amp

Always on course with Mastervolt. Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.

DC Master DC-DC converters

The required voltage for DC current can vary. Some equipment requires 24 V, while onboard equipment usually requires 12 V. For custom DC current, Mastervolt offers a series of compact and made to measure DC-DC converters for both 12 V and 24 V battery systems that offer stable power with the right current for any connected consumer.

Features:
  • Recreational and semi-professional use
  • Easy to install using included mounting bracket, screws and fasteners
  • Smart electronics mean no unnecessary heat generation
  • Continuous output
  • Two minutes of extra power for short power boosts
  • Excellent price/performance ratio

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$107.65for Each
Retail $122.87
Mfr PN: 81400300
Stock: 3

Mastervolt DC Master 24V to 12V Converter - 24 Amp Mastervolt DC Master 24V to 12V Converter - 24 Amp
Online
$253.42for Each
Retail $289.24
Mfr PN: 81400330
Stock: 1
DC Master 24V to 12V Converter - 24 Amp

Always on course with Mastervolt. Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.

DC Master DC-DC converters

The required voltage for DC current can vary. Some equipment requires 24 V, while onboard equipment usually requires 12 V. For custom DC current, Mastervolt offers a series of compact and made to measure DC-DC converters for both 12 V and 24 V battery systems that offer stable power with the right current for any connected consumer.

Features:
  • Recreational and semi-professional use
  • Easy to install using included mounting bracket, screws and fasteners
  • Smart electronics mean no unnecessary heat generation
  • Continuous output
  • Two minutes of extra power for short power boosts
  • Excellent price/performance ratio

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$253.42for Each
Retail $289.24
Mfr PN: 81400330
Stock: 1

Mastervolt DC Master 24V to 12V Converter - 24A w/Isolator Mastervolt DC Master 24V to 12V Converter - 24A w/Isolator
Online
$383.96for Each
Retail $438.21
Mfr PN: 81500350
Stock: 1
DC Master 24V to 12V Converter - 24A w/Isolator

Power you can rely on
The required voltage for DC current can vary. Some equipment requires 24 V, while onboard equipment usually requires 12 V. For custom DC current, Mastervolt offers a series of compact and made to measure DC-DC converters for both 12 V and 24 V battery systems that offer stable power with the right current for any connected consumer. There is a wide range of DC Master converters available, including insulated and non-insulated models.

Benefits
  • Recreational and semi-professional use.
  • Easy to install using included mounting bracket, screws and fasteners.
  • Smart electronics mean no unnecessary heat generation.
  • Continuous output.
  • Insulated and non-insulated models available.
  • Two minutes of extra power for short power boosts.
  • Excellent price/performance ratio.


Intelligent DC-DC converters
A large benefit of the DC Master models is their two minutes of extra capacity; ideal if you need a short power boost.

Complete package DC Master
All DC Master converters are delivered with mounting bracket, screws and fasteners.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$383.96for Each
Retail $438.21
Mfr PN: 81500350
Stock: 1

Mastervolt EasyView 5 Touch Screen Monitoring and Control Panel Mastervolt EasyView 5 Touch Screen Monitoring and Control Panel
Online
$341.54for Each
Retail $405.38
Mfr PN: 77010310
Stock: 8

EasyView 5

Waterproof system monitor with daylight display and intuitive touch control.

Controlling your Mastervolt system has never been easier. The EasyView 5 features a sharp, waterproof display which is clearly readable in daylight. Thanks to the color touch screen and multi-language menu, the display is a pleasure to operate. Easily customizable favorite pages show all relevant system information at a glance.

Features

  • Water proof, daylight readable color display
  • Intuitive touch control
  • Customizable favorite pages
  • Log book for warnings and alarms
  • Buzzer and Home button
  • Easy mounting: Front mount, wall mount or retrofit
  • MasterBus powered or MasterBus powering by 12 V DC input
  • Easy updating through integrated USB

Applications

The EasyView 5 completes any MasterBus system. Applications include yachts, vehicles and stationary systems. Markets include marine, mobile (recreational & professional), infra-structure, offshore, off-grid and industrial markets.

Specifications

  • Display: 4.5 inch high contrast display with capacitive touch control. Resolution: 480x272 pixels, Color depth: 16 bits
  • Languages: English, Dutch, German, Spanish, Italian, French, Finnish, Swedish, Norwegian, Danish
  • IP degree: IP65 waterproof front
  • Power supply: MasterBus powered or MasterBus powering through 12/24 V input
  • Power Consumption: < 160 mW (idle mode)
  • Alarm: Buzzer integrated
  • Connections: 2 x MasterBus, USB, 12/24 V auto ranging input for optional external power
  • Mounting: Front mount, wall mount and MasterView Easy retrofit
  • Dimensions, HxWxD: 113 x 127 x 43 mm

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$341.54for Each
Retail $405.38
Mfr PN: 77010310
Stock: 8

Mastervolt Mac Plus 12/12-50 Converter Mastervolt Mac Plus 12/12-50 Converter
Online
$557.16for Each
Retail $629.85
Mfr PN: 81205100
Stock: 0

Mac Plus 12/12-50 Converter

Charging the service batteries on board of a vehicle or vessel can be challenging. Recharging tends to take a long time and batteries may not receive a full charge. This is a common problem found in boats, service vans, campers and trucks. Smart alternators and start/stop systems make the problem even worse.

Robust DC-DC charger guarantees optimal condition of your service battery

Traditionally, a service battery is linked to the starter battery by means of a charge relay. The starter battery is located close to the alternator and receives most of the charge current. However, the service battery is usually further away. Long cables cause voltage drop, leading to slow charging, resulting in failing appliances and premature failure of the battery.

Modern, fuel efficient engines are equipped with smart alternators, following regulations such as Euro 5 and Euro 6. Instead of a constant output, smart alternators provide a variable voltage; after a brief charging period, voltage is reduced and the charging stops. Furthermore, the energy produced by regenerative braking leads to voltage peaks. Service batteries coupled in the traditional way will receive hardly any charge and may be damaged by these peak voltages.

To solve these issues, Mastervolt introduces the Mac Plus DC-DC chargers, available in 12 V or 24 V. The Mac Plus monitors the service battery and compensates the voltage loss. The proven 3-step charge method ensures a quick and safe charge. Moreover, by stabilizing the charge voltage, Mac Plus protects your service battery and sensitive equipment.

The Mac Plus is your battery’s best friend. It monitors your service battery and makes sure it’s always fully charged, maximizing the lifetime of your battery. 

Features:

  • Fast and safe charging during short trips.
  • Fanless design for silent operation.
  • Suitable for flooded, Gel, AGM and Li-Ion batteries (incl. LiFePO4).
  • Charges even fully depleted batteries.
  • Engine run detection protects starter battery.
  • Adjustable current limits to meet Euro 5/6 requirements.
  • Voltage stabilisation protects sensitive equipment, lights and loads.
  • Parallel operation to obtain charging capacities well over 100 Amps.
  • MasterBus for intelligent system monitoring and automation.
  • Temperature compensation and voltage sense for an optimal charging result.
  • E-mark certification for mobile applications.
  • Power supply mode.
  • Heavy duty connections for easy installation and quick set up via DIP switches.

Applications

Boost charge voltage when service battery is located further from charging source or in systems with a smart alternator. When a stable power supply or different system voltage is needed. 

Euro 5/6 solution

Charging service batteries in Euro 5/6 applications?
The Mac Plus provides constant power to the service battery, even when the alternator is inactive. 

Parallel operation

The parallel configuration of several units will provide you over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimum power loss when switching from 24 to 12 V and vice versa. 

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$557.16for Each
Retail $629.85
Mfr PN: 81205100
Stock: 0

Mastervolt Mac Plus 12/24-30 Converter Mastervolt Mac Plus 12/24-30 Converter
Online
$557.16for Each
Retail $629.85
Mfr PN: 81205300
Stock: 3

Mac Plus 12/24-30 Converter

Charging the service batteries on board of a vehicle or vessel can be challenging. Recharging tends to take a long time and batteries may not receive a full charge. This is a common problem found in boats, service vans, campers and trucks. Smart alternators and start/stop systems make the problem even worse.

Robust DC-DC charger guarantees optimal condition of your service battery

Traditionally, a service battery is linked to the starter battery by means of a charge relay. The starter battery is located close to the alternator and receives most of the charge current. However, the service battery is usually further away. Long cables cause voltage drop, leading to slow charging, resulting in failing appliances and premature failure of the battery.

Modern, fuel efficient engines are equipped with smart alternators, following regulations such as Euro 5 and Euro 6. Instead of a constant output, smart alternators provide a variable voltage; after a brief charging period, voltage is reduced and the charging stops. Furthermore, the energy produced by regenerative braking leads to voltage peaks. Service batteries coupled in the traditional way will receive hardly any charge and may be damaged by these peak voltages.

To solve these issues, Mastervolt introduces the Mac Plus DC-DC chargers, available in 12 V or 24 V. The Mac Plus monitors the service battery and compensates the voltage loss. The proven 3-step charge method ensures a quick and safe charge. Moreover, by stabilizing the charge voltage, Mac Plus protects your service battery and sensitive equipment.

The Mac Plus is your battery’s best friend. It monitors your service battery and makes sure it’s always fully charged, maximising the lifetime of your battery. 

Features:

  • Fast and safe charging during short trips.
  • Fanless design for silent operation.
  • Suitable for flooded, Gel, AGM and Li-Ion batteries (incl. LiFePO4).
  • Charges even fully depleted batteries.
  • Engine run detection protects starter battery.
  • Adjustable current limits to meet Euro 5/6 requirements.
  • Voltage stabilisation protects sensitive equipment, lights and loads.
  • Parallel operation to obtain charging capacities well over 100 Amps.
  • MasterBus for intelligent system monitoring and automation.
  • Temperature compensation and voltage sense for an optimal charging result.
  • E-mark certification for mobile applications.
  • Power supply mode.
  • Heavy duty connections for easy installation and quick set up via DIP switches.

Applications

Boost charge voltage when service battery is located further from charging source or in systems with a smart alternator. When a stable power supply or different system voltage is needed. 

Euro 5/6 solution

Charging service batteries in Euro 5/6 applications?
The Mac Plus provides constant power to the service battery, even when the alternator is inactive. 

Parallel operation

The parallel configuration of several units will provide you over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimum power loss when switching from 24 to 12 V and vice versa. 

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$557.16for Each
Retail $629.85
Mfr PN: 81205300
Stock: 3

Mastervolt Mass Sine Wave Inverter 12/800 (230V/50Hz) Mastervolt Mass Sine Wave Inverter 12/800 (230V/50Hz)
Online
$839.06for Each
Retail $1035.79
Mfr PN: 24010800
Stock: 0
Mass Sine Wave Inverter 12/800 (230V/50Hz)

For the toughest tasks
Mass Sine sine wave inverters are designed for the toughest conditions for professional, semi-professional and recreational purposes. Even under the most extreme conditions the products from the Mass Sine series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 280,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.

Making the best even better
The reliability and long lifespan of Mastervolt's sine wave inverters have been established beyond doubt over the past 20 years. While the Mass products have evolved with the latest technological developments, the dimensions and connections have remained the same. As a result it is exceptionally easy to replace one unit with another with only negligible downtime.

Mastervolt Green by Heart
As part of our constant search for eco-friendly and long-lasting solutions, Mastervolt has developed the Green by Heart programme. Its impact on the Mass Sine inverters include:
  • An exceptionally effective use of the consumed input current (cos phi) > 0.98!
  • Use of top quality components with a long lifespan.
  • Savings in weight and space.
  • Fewer installation materials.


Powerful selling points
  • Capacity between 800 W and 5 kW.
  • Suitable for high starting/peak loads, even up to 200% at brief consumption.
  • 230V/50Hz pure sine wave voltage; no faults or humming sounds from connected equipment, not even with sensitive communication and measuring equipment.
  • Fully MasterBus compatible with AC Power Analyser or MasterBus Inverter Interface.
  • All Mastervolt inverters provide pure sine wave voltage to ensure seamless operation of the connected equipment. Mastervolt inverters are the best choice available.


MasterBus compatible
In combination with the MasterBus Inverter Interface or AC Power Analyser, you can easily connect every Mass Sine inverter within a MasterBus network. All you need is a single cable with one connection. Your benefits: Fast and easy installation, plus centralised monitoring, configuration and operation of your system with a MasterView panel.

Easy and safe connection
Mass products are equipped with certified industrial connection technology. The larger inverter models have internal connections, the smaller models use a cable and plug & play socket.

Automatic switching
Easy to install within a mains voltage and/or generator power system, the Mass Sine inverter can switch between sources or combine the supply using the Masterswitch or Systemswitch system.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$839.06for Each
Retail $1035.79
Mfr PN: 24010800
Stock: 0

Mastervolt Mass Sine Wave Inverter 24/2500 (230V/50Hz) Mastervolt Mass Sine Wave Inverter 24/2500 (230V/50Hz)
Online
$2727.05for Each
Retail $3352.16
Mfr PN: 24022500
Stock: 4
Mass Sine Wave Inverter 24/2500 (230V/50Hz)

For the toughest tasks
Mass Sine sine wave inverters are designed for the toughest conditions for professional, semi-professional and recreational purposes. Even under the most extreme conditions the products from the Mass Sine series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 280,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.

Making the best even better
The reliability and long lifespan of Mastervolt's sine wave inverters have been established beyond doubt over the past 20 years. While the Mass products have evolved with the latest technological developments, the dimensions and connections have remained the same. As a result it is exceptionally easy to replace one unit with another with only negligible downtime.

Mastervolt Green by Heart
As part of our constant search for eco-friendly and long-lasting solutions, Mastervolt has developed the Green by Heart programme. Its impact on the Mass Sine inverters include:
  • An exceptionally effective use of the consumed input current (cos phi) > 0.98!
  • Use of top quality components with a long lifespan.
  • Savings in weight and space.
  • Fewer installation materials.


Powerful selling points
  • Capacity between 800 W and 5 kW.
  • Suitable for high starting/peak loads, even up to 200% at brief consumption.
  • 230V/50Hz pure sine wave voltage; no faults or humming sounds from connected equipment, not even with sensitive communication and measuring equipment.
  • Fully MasterBus compatible with AC Power Analyser or MasterBus Inverter Interface.
  • All Mastervolt inverters provide pure sine wave voltage to ensure seamless operation of the connected equipment. Mastervolt inverters are the best choice available.


MasterBus compatible
In combination with the MasterBus Inverter Interface or AC Power Analyser, you can easily connect every Mass Sine inverter within a MasterBus network. All you need is a single cable with one connection. Your benefits: Fast and easy installation, plus centralised monitoring, configuration and operation of your system with a MasterView panel.

Easy and safe connection
Mass products are equipped with certified industrial connection technology. The larger inverter models have internal connections, the smaller models use a cable and plug & play socket.

Automatic switching
Easy to install within a mains voltage and/or generator power system, the Mass Sine inverter can switch between sources or combine the supply using the Masterswitch or Systemswitch system.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$2727.05for Each
Retail $3352.16
Mfr PN: 24022500
Stock: 4

Mastervolt MasterShunt 500 CZone Mastervolt MasterShunt 500 CZone
Online
$303.45for Each
Retail $325.75
Mfr PN: 77020115
Stock: 4

MasterShunt 500 CZone

MasterShunt is the heart of every battery powered energy system. This integrated battery monitor shares information about the battery bank with other MasterBus, CZone or NMEA 2000 enabled devices such as battery chargers, inverter/chargers and displays. No surprises: allowing complete automation of your system, MasterShunt improves comfort, prolongs battery life and extends your runtime.

The MasterShunt 500 provides all information needed for monitoring your battery bank and control of your system, such as voltage, current, state of charge and time remaining. All information is made available to the system by a single MasterBus or CZone cable. Extremely accurate measurement of current flow over state of charge enables the MasterShunt to precisely determine the time remaining.

Programmable events and an integrated real time clock make it possible to fully automate your system. Examples are to start your generator automatically when the battery bank is low (or just delaying at night!), or to automatically generate a warning at a certain depth of discharge. The proven MasterShunt design has been upgraded to obtain an even higher level of accuracy and control. Taking into account battery specific parameters, MasterShunt takes reading accuracy to a whole new level.

The MasterShunt 500 CZone allows freedom of choice with regards to fuse type, rating and location. The battery monitor is supplied with an internal bus bar, to be used in situations where an external fuse holder is selected. In case the MasterShunt is installed close to the battery, the bus bar may be replaced by either an ANL type or Class T main fuse, saving both space and cost.

Features:

  • MasterBus, CZone and NMEA 2000 communication.
  • Fits in a CZone system including setup tools and configuration file.
  • Digital shunt providing the energy system with extensive information and historical data.
  • Very accurate and reliable determination of State of Charge (SOC).
  • Service mode prevents memory loss during system maintenance.
  • Realistic and precise indication of the time remaining.
  • For higher current, multiple MasterShunt models may be installed in parallel.
  • MasterConnect system makes connecting to the DC Distribution product very easy.
  • Straight forward, easy to install.
  • Freedom of choice for fuse type, rating and location. Suitable for T-fuse and ANL-fuse (to be ordered separately).
  • Robust housing with isolation of the DC connections.

Applications:

Any application in marine, mobile, industrial, infrastructure where batteries need to be monitored for increased reliability, battery life, comfort and runtime.

Online
$303.45for Each
Retail $325.75
Mfr PN: 77020115
Stock: 4

Mastervolt PowerCombi Pure Sine Wave Inverter/Charger - 12V - 200W - 100 Amp Kit Mastervolt PowerCombi Pure Sine Wave Inverter/Charger - 12V - 200W - 100 Amp Kit
Online
$992.75for Each
Mfr PN: 36212001
Stock: 0

PowerCombi Pure Sine Wave Inverter/Charger - 12V - 200W - 100 Amp Kit

Simple. Independent. Flexible.

The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface).

With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion.

Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications.

Features:

  • Input voltage range: 10-15.5V DC
  • Includes temperature sensor and powercombi remote
  • Can be used with Flooded, Gel, AGM and custom battery types
  • MasterBus compatible via CZone - MasterBus Interface

Specifications:

  • Amperage: 100 Amps
  • Amperage Draw at Rest: 3 Amps (idle power)
  • Multi Bank Chargers: 1 Bank
  • Output Wave Form: Pure Sine Wave
  • Type: Inverter/Charger
  • Voltage: 12V DC
Online
$992.75for Each
Mfr PN: 36212001
Stock: 0

Mastervolt SCM25 MPPT Solar ChargeMaster Mastervolt SCM25 MPPT Solar ChargeMaster
Online
$243.56for Each
Retail $277.99
Mfr PN: 131902500
Stock: 2
SCM25 MPPT Solar ChargeMaster

The SCM25 MPPT is Mastervolt's smallest MPPT charge regulator and just as powerful as its big brother. With 200 to 700 Wp in solar panels, switchable output and buzzer, this Solar ChargeMaster is very well suited to small and medium systems.

The innovative technology in the Mastervolt MPPT charge regulators increases the efficiency of the solar panels. The SCM25 MPPT charges your batteries up to 30% faster than PWM regulators - with the same number of panels.

MPPT Charge Regulator For All Solar Panels
Besides the traditional 36 and 72-cell panels, the SCM25 MPPT is also ideal for the inexpensive 60-cell panels. The high PV voltage makes it possible to connect several panels in series, significantly reducing the required cable length, installation time and power loss in solar cables.

Easy To Use, Safe & Flexible
The SCM25 MPPT is suitable for all battery types, including Mastervolt Lithium Ion. The charging profiles for all types of batteries are pre-programmed and can be selected at the push of a button. The SCM25 MPPT is quiet and equipped with a very user-friendly, clear display. Built-in protection against overload, high/low battery voltage, overheating, short circuits and reverse polarity ensures that safety comes first. Moreover, the SCM25 MPPT has a robust casing and is protected against condensation in conformity with IP23.

Features:
  • Very high efficiency for faster charging
  • Stable, accurate Mastervolt Maximum Power Point Tracker
  • Up to 30% faster charging compared with PWM technology
  • Suitable for inexpensive 60-cell panels
  • Capacity for solar panel configurations from 200 to 700 Wp
  • Suitable for all battery types, including Mastervolt Lithium Ion
  • Automatic 12/24 V detection
  • Flexible charging characteristics
  • Battery temperature sensor for long lifespan
  • Large and bright display
  • Secure switchable output
  • Safe operation, audio signal in case of malfunctions
  • Very quiet operation
  • Robust casing, suitable for humid environments (IP23)

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$243.56for Each
Retail $277.99
Mfr PN: 131902500
Stock: 2

Mastervolt SCM60 MPPT-MB Controller Mastervolt SCM60 MPPT-MB Controller
Online
$690.93for Each
Retail $788.58
Mfr PN: 131906000
Stock: 5

SCM60 MPPT-MB Controller

The SCM60 MPPT-MB is Mastervolt’s largest MPPT solar charge regulator. With 600 to 3600 Wp in solar panels, connections for 12, 24 and 48-volt battery banks and an integrated MasterBus connection, this Solar ChargeMaster is perfect for large and medium-sized systems.

The innovative technology in the Mastervolt MPPT charge regulators increases the efficiency of the solar panels. The SCM60 MPPT-MB charges your batteries up to 30% faster than PWM regulators – with the same number of panels.

MPPT charge regulator for all solar panels

Besides the traditional 36 and 72-cell panels, the SCM60 MPPT-MB is also ideal for the inexpensive 60-cell panels. A maximum input voltage of 145 V makes it possible to connect several panels in series, reducing the required cable length, installation time and power loss significantly.

Robust, easy to use, safe and flexible

The SCM60 MPPT-MB is suitable for all battery types, including Mastervolt Lithium Ion. The charging profiles for all types of batteries are pre-programmed and can be selected via the display or via MasterBus. The SCM60 MPPT-MB is very quiet and equipped with a clear and user-friendly display. The built-in protection against overload, high/low battery voltage, overheating, short circuits and reverse polarity ensures that safety comes first. Moreover, the SCM60 MPPT-MB has a sturdy casing and is protected against water spray in conformity with IP23.

The smart logic of MasterBus

The MasterBus platform brings advanced system functions within reach and makes it possible to follow a complete energy system on a single display. The intelligent one-cable system simplifies the cabling, allowing valuable savings in space and weight. What’s more,  you can automate your systems and adapt them to your needs.

Architects, builders and contractors also benefit, as there is less material, less work and less fiddling, while testing is easy. There is also a choice of ten languages. The user interface is identical for all Mastervolt products, whether battery chargers, inverters, Combis, batteries or other devices. 

More comfort and independence

Use the power of MasterBus to switch on your water heater as soon as the battery is fully charged. Or link the Solar ChargeMaster via MasterBus to a Mastervolt Lithium Ion battery, removing the need for the disconnect relays usually required for this type of battery. The possibilities are endless.

Features:

  • Very high efficiency for faster charging of the batteries
  • Stable, accurate Mastervolt Maximum Power Point Tracker
  • Up to 30% faster charging compared with PWM technology.
  • Designed for inexpensive 60-cell panels.
  • Capacity for solar panel configurations from 600 to 3600 Wp.
  • Automatic 12/24/48 V detection.
  • Flexible charging characteristics.
  • Battery temperature sensor for long lifespan.
  • Suitable for all battery types, including Mastervolt Lithium Ion.
  • No need for Lithium Ion safety relay.
  • Monitoring and control via MasterBus.
  • Large and bright display.
  • Safe, very quiet operation.
  • Robust casing, suitable for humid environments (IP23)

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$690.93for Each
Retail $788.58
Mfr PN: 131906000
Stock: 5

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.