AAFES MEMBERS NOW SAVE EVEN MORE. PREVIOUS MAP (min price) ITEMS ARE NOW DISCOUNTED!!

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Lee's Tackle

Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube
Online
$153.86for Each
Retail $179.50
Mfr PN: RH575
Stock: 7
Swivel Base Rod Holders

RH575

Standard Angle 30°

Stainless Steel Flush Mount w/ Swivel Base

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$153.86for Each
Retail $179.50
Mfr PN: RH575
Stock: 7

Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 14.5" Tube Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 14.5" Tube
Online
$166.45for Each
Retail $195.00
Mfr PN: RH575XL
Stock: 7
Swivel Base Rod Holders

RH575XL

Standard Angle 30°

Stainless Steel Flush Mount w/ Swivel Base Extra Long

This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$166.45for Each
Retail $195.00
Mfr PN: RH575XL
Stock: 7

Lee's Clamp-On Light Bracket - 1.050" Pipe Lee's Clamp-On Light Bracket - 1.050" Pipe
Online
$65.40for Each
Retail $78.50
Mfr PN: LT5201
Stock: 1
Clamp-On Accessory

Fits: 1.050" Pipe
Mounts: Horizontal/Vertical
Finish: Silver

Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.

Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
Online
$65.40for Each
Retail $78.50
Mfr PN: LT5201
Stock: 1

Lee's Clamp-On Light Bracket - 1.900" Pipe Lee's Clamp-On Light Bracket - 1.900" Pipe
Online
$77.14for Each
Retail $80.75
Mfr PN: LT5204
Stock: 3
Clamp-On Accessory

Fits: 1.900" Pipe
Mounts: Horizontal/Vertical
Finish: Silver

Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.

Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.

Online
$77.14for Each
Retail $80.75
Mfr PN: LT5204
Stock: 3

Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5201BK
Stock: 0
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe

Color:Black
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount:Horizontal

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5201BK
Stock: 0

Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5202BK
Stock: 5
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe

Color:Black
Pipe Size:#2
Fits:1.315" O.D. Pipe
Mount:Horizontal

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5202BK
Stock: 5

Lee's Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. Pipe Lee's Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5003BK
Stock: 0
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. Pipe

Color: Black
Pipe Size: #3
Fits: 1.660" O.D. Pipe
Mount: Vertical

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5003BK
Stock: 0

Lee's Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe Lee's Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5004BK
Stock: 0
Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.900 O.D.
Pipe


Color:Black
Pipe Size:#4
Fits:1.900" O.D. Pipe
Mount:Vertical

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5004BK
Stock: 0

Lee's Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe Lee's Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5005BK
Stock: 4
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe


Color:Black
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5005BK
Stock: 4

Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5201GL
Stock: 2
Aluminum Clamp-on Rod Holders

Model:  RA5201GL
Color:   Gold
Fits:      1.050" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5201GL
Stock: 2

Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5202GL
Stock: 0
Aluminum Clamp-on Rod Holders

Model:  RA5202GL
Color:   Gold
Fits:      1.315" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5202GL
Stock: 0

Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5204GL
Stock: 1
Aluminum Clamp-on Rod Holders

Model:  RA5204GL
Color:   Gold
Fits:      1.900" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5204GL
Stock: 1

Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5001GL
Stock: 0
Aluminum Clamp-on Rod Holders

Model:  RA5001GL
Color:   Gold
Fits:      1.050" O.D. Pipe
Mount:  Vertical


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5001GL
Stock: 0

Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5002GL
Stock: 1
Aluminum Clamp-on Rod Holders

Model:  RA5002GL
Color:   Gold
Fits:      1.315" O.D. Pipe
Mount:  Vertical


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$139.25for Each
Retail $165.00
Mfr PN: RA5002GL
Stock: 1

Lee's Clamp-On Rod Holder - Silver - Vertical Mount - Fits 2.375" O.D. Pipe Lee's Clamp-On Rod Holder - Silver - Vertical Mount - Fits 2.375" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5005SL
Stock: 0
Aluminum Clamp-on Rod Holders

Model:  RA5005SL
Color:   Silver
Fits:      2.375" O.D. Pipe
Mount:  Vertial


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5005SL
Stock: 0

Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5201SL
Stock: 2
Aluminum Clamp-on Rod Holders

Model:  RA5201SL
Color:   Silver
Fits:      1.050" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5201SL
Stock: 2

Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5202SL
Stock: 0
Aluminum Clamp-on Rod Holders

Model:  RA5202SL
Color:   Silver
Fits:      1.315" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5202SL
Stock: 0

Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5203SL
Stock: 3
Aluminum Clamp-on Rod Holders

Model:  RA5203SL
Color:   Silver
Fits:      1.660" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5203SL
Stock: 3

Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 2.375" / 2-3/8" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 2.375" / 2-3/8" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5205SL
Stock: 2
Aluminum Clamp-on Rod Holders

Model:  RA5205SL
Color:   Silver
Fits:      2.375" O.D. Pipe
Mount:  Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5205SL
Stock: 2

Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5001SL
Stock: 2
Aluminum Clamp-on Rod Holders

Model:  RA5001SL
Color:   Sliver
Fits:      1.050" O.D. Pipe
Mount:  Vertical


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5001SL
Stock: 2

Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5003SL
Stock: 0
Aluminum Clamp-on Rod Holders

Model:  RA5003SL
Color:   Silver
Fits:      1.660" O.D. Pipe
Mount:  Vertical


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5003SL
Stock: 0

Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5004SL
Stock: 1
Aluminum Clamp-on Rod Holders

Model:  RA5004SL
Color:   Silver
Fits:      1.900" O.D. Pipe
Mount:  Vertial


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.

These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$137.62for Each
Retail $157.50
Mfr PN: RA5004SL
Stock: 1

Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5201WH
Stock: 0
Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe

Color:White
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount:Horizontal

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5201WH
Stock: 0

Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5202WH
Stock: 0
Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe

Color:White
Pipe Size:#2
Fits:1.315" O.D. Pipe
Mount:Horizontal

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5202WH
Stock: 0

Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5203WH
Stock: 2
Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe

Color:White
Pipe Size:#3
Fits:1.660" O.D. Pipe
Mount:Horizontal

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Online
$103.52for Each
Retail $125.00
Mfr PN: RA5203WH
Stock: 2

Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5204WH
Stock: 0
Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe

Specifications:
  • Color: White
  • Pipe Size: #4
  • Fits: 1.900" O.D. Pipe
  • Mount: Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$103.52for Each
Retail $125.00
Mfr PN: RA5204WH
Stock: 0

Lee's MX Pro Series Fixed Angle Center Rigger Holder - 22° - 1.5" ID - Bright Silver Lee's MX Pro Series Fixed Angle Center Rigger Holder - 22° - 1.5" ID - Bright Silver
Online
$249.93for Each
Retail $255.00
Mfr PN: MX7001CR
Stock: 0
MX Pro Series Fixed Angle Center Rigger Holder - 22° - 1.5" ID - Bright Silver

The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.

  • MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired
  • Slightly larger footprint (5"x 7")
  • Ruggedly constructed from marine grade anodized aluminum
  • Can be easily attached above or below the standing platform or any flat surface
  • Anodized in Bright Silver it is as strong as it is attractive
Online
$249.93for Each
Retail $255.00
Mfr PN: MX7001CR
Stock: 0

Lee's MX Pro Series Fixed Angle Center Rigger Holder - 30° - 1.5" ID - Bright Silver Lee's MX Pro Series Fixed Angle Center Rigger Holder - 30° - 1.5" ID - Bright Silver
Online
$249.93for Each
Retail $255.00
Mfr PN: MX7002CR
Stock: 0
MX Pro Series Fixed Angle Center Rigger Holder - 30° - 1.5" ID - Bright Silver

The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.

  • MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired
  • Slightly larger footprint (5"x 7")
  • Ruggedly constructed from marine grade anodized aluminum
  • Can be easily attached above or below the standing platform or any flat surface
  • Anodized in Bright Silver it is as strong as it is attractive

Online
$249.93for Each
Retail $255.00
Mfr PN: MX7002CR
Stock: 0

Lee's MX Pro Series Fixed Angle Center Rigger Holder - 45° - 1.5" ID - Bright Silver Lee's MX Pro Series Fixed Angle Center Rigger Holder - 45° - 1.5" ID - Bright Silver
Online
$249.93for Each
Retail $255.00
Mfr PN: MX7003CR
Stock: 0
MX Pro Series Fixed Angle Center Rigger Holder - 45° - 1.5" ID - Bright Silver

The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.

  • MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired
  • Slightly larger footprint (5"x 7")
  • Ruggedly constructed from marine grade anodized aluminum
  • Can be easily attached above or below the standing platform or any flat surface
  • Anodized in Bright Silver it is as strong as it is attractive

Online
$249.93for Each
Retail $255.00
Mfr PN: MX7003CR
Stock: 0

Lee's Rod and Reel Hanger Set - Avet 30W - Bright Gold Lee's Rod and Reel Hanger Set - Avet 30W - Bright Gold
Online
$54.81for Each
Retail $63.95
Mfr PN: MC0075-9001
Stock: 0
Rod Storage Systems

Rod and Reel Hanger Set

Anodized Finish: Gold
For: Avet 30W

Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
Online
$54.81for Each
Retail $63.95
Mfr PN: MC0075-9001
Stock: 0

Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold
Online
$54.81for Each
Retail $63.95
Mfr PN: MC0075-1130
Stock: 1
Rod Storage Systems
Rod and Reel Hanger Set

Anodized Finish: Gold
For: Penn International 130, 130H, 130S

Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Online
$54.81for Each
Retail $63.95
Mfr PN: MC0075-1130
Stock: 1

Lee's Rod and Reel Hanger Set - Penn International 130ST - Bright Gold Lee's Rod and Reel Hanger Set - Penn International 130ST - Bright Gold
Online
$54.81for Each
Retail $63.95
Mfr PN: MC0075-1131
Stock: 1
Rod Storage Systems
Rod and Reel Hanger Set

Anodized Finish: Gold
For: Penn International 130ST

Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
Online
$54.81for Each
Retail $63.95
Mfr PN: MC0075-1131
Stock: 1

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.