AAFES MEMBERS NOW SAVE EVEN MORE. PREVIOUS MAP (min price) ITEMS ARE NOW DISCOUNTED!!

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Lee's Tackle

Lee's 0 Degree SS Flush Mount Swivel Base Rod Holder - 2" x 9" - Medium Lee's 0 Degree SS Flush Mount Swivel Base Rod Holder - 2" x 9" - Medium
Online
$139.66for Each
Retail $160.00
Mfr PN: RH5367V
Stock: 1
Swivel Base Flush Mount Rod Holder
Part #: RH-5367SS
Medium 0 Degree Stainless Steel

Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.
Online
$139.66for Each
Retail $160.00
Mfr PN: RH5367V
Stock: 1

Lee's 0(o) Stainless Steel Flush Mount Rod Holder - 2.25" O.D Lee's 0(o) Stainless Steel Flush Mount Rod Holder - 2.25" O.D
Online
$111.64for Each
Retail $115.00
Mfr PN: RH532VS
Stock: 0
Flush Mount Rod Holder

RH-532VS Large 0° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Online
$111.64for Each
Retail $115.00
Mfr PN: RH532VS
Stock: 0

Lee's 0(o) Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D Lee's 0(o) Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D
Online
$99.87for Each
Retail $107.50
Mfr PN: RH527VS/XS
Stock: 8
Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-527VS/XS Medium 0°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Online
$99.87for Each
Retail $107.50
Mfr PN: RH527VS/XS
Stock: 8

Lee's 0(o) Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D Lee's 0(o) Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D
Online
$126.66for Each
Retail $130.00
Mfr PN: RH532VS/XS
Stock: 8
Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-532VS/XS Large 0°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.


Online
$126.66for Each
Retail $130.00
Mfr PN: RH532VS/XS
Stock: 8

Lee's 0(o) Stainless Steel Swivel Base Flush Mount Rod Holder - Medium - 2" OD X 6.5" Tube f/ Small Bent Butts Lee's 0(o) Stainless Steel Swivel Base Flush Mount Rod Holder - Medium - 2" OD X 6.5" Tube f/ Small Bent Butts
Online
$133.97for Each
Retail $156.00
Mfr PN: RH5167V
Stock: 0
RH5167V

Vertical 0° Short Tube

Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$133.97for Each
Retail $156.00
Mfr PN: RH5167V
Stock: 0

Lee's 0(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube Lee's 0(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube
Online
$166.45for Each
Retail $179.50
Mfr PN: RH577V
Stock: 21
Swivel Base Rod Holder

RH577V

Vertical 0°

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$166.45for Each
Retail $179.50
Mfr PN: RH577V
Stock: 21

Lee's 12' MKII Bright Silver Pole w/Black Spike - 1 3/8" OD Lee's 12' MKII Bright Silver Pole w/Black Spike - 1 3/8" OD
Online
$274.91for Each
Retail $300.39
Mfr PN: AO8712CR
Stock: 0
12' MKII Bright Silver Pole w/Black Spike

1 3/8" diameter
Online
$274.91for Each
Retail $300.39
Mfr PN: AO8712CR
Stock: 0

Lee's 13' Bright Silver Center Rigger Pole w/Black Spike 1-3/8" Lee's 13' Bright Silver Center Rigger Pole w/Black Spike 1-3/8"
Online
$443.73for Each
Mfr PN: MX8713CR
Stock: 0
13' Bright Silver/Black Spike - Step Tube 1-3/8" - No Spreader

The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.

Features:
  • 13'
  • Bright Silver/Black Spike
  • MX Step-tube style
  • No spreader
Online
$443.73for Each
Mfr PN: MX8713CR
Stock: 0

Lee's 15 Degree SS Flush Mount Swivel Base Rod Holder - 2" x 9" - Medium Lee's 15 Degree SS Flush Mount Swivel Base Rod Holder - 2" x 9" - Medium
Online
$139.66for Each
Retail $160.00
Mfr PN: RH5369H
Stock: 0
Swivel Base Flush Mount Rod Holder
Medium, 15 Degree, Stainless Steel

Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.
Online
$139.66for Each
Retail $160.00
Mfr PN: RH5369H
Stock: 0

Lee's 15(o) Stainless Steel Flush Mount Rod Holder - 2" O.D Lee's 15(o) Stainless Steel Flush Mount Rod Holder - 2" O.D
Online
$89.72for Each
Retail $97.50
Mfr PN: RH529HS
Stock: 18
Flush Mount Rod Holder

RH-529HS Medium 15° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Online
$89.72for Each
Retail $97.50
Mfr PN: RH529HS
Stock: 18

Lee's 15(o) Stainless Steel Flush Mount Rod Holder - 2.25" O.D Lee's 15(o) Stainless Steel Flush Mount Rod Holder - 2.25" O.D
Online
$111.64for Each
Retail $115.00
Mfr PN: RH534HS
Stock: 24
Flush Mount Rod Holder

RH-534HS Large 15° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Online
$111.64for Each
Retail $115.00
Mfr PN: RH534HS
Stock: 24

Lee's 15(o) Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D Lee's 15(o) Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D
Online
$99.87for Each
Retail $107.50
Mfr PN: RH529HS/XS
Stock: 2
Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-529HS/XS Medium 15°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Online
$99.87for Each
Retail $107.50
Mfr PN: RH529HS/XS
Stock: 2

Lee's 15(o) Stainless Steel Swivel Base Flush Mount Rod Holder - Medium - 2" OD X 6.5" Tube f/ Small Bent Butts Lee's 15(o) Stainless Steel Swivel Base Flush Mount Rod Holder - Medium - 2" OD X 6.5" Tube f/ Small Bent Butts
Online
$133.97for Each
Retail $156.00
Mfr PN: RH5169H
Stock: 5
Swivel Base Rod Holders

RH5169

Half Angle 15° Short Tube

Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.



Online
$133.97for Each
Retail $156.00
Mfr PN: RH5169H
Stock: 5

Lee's 15(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube Lee's 15(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube
Online
$166.45for Each
Retail $179.50
Mfr PN: RH579H
Stock: 2
Swivel Base Rod Holders

RH579

Half Angle 15°

Stainless Steel Flush Mount w/ Swivel Base

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$166.45for Each
Retail $179.50
Mfr PN: RH579H
Stock: 2

Lee's 16' Extra Strong Bright Silver Outrigger Poles 1 3/4" Lee's 16' Extra Strong Bright Silver Outrigger Poles 1 3/4"
Online
$834.38for Each
Mfr PN: AP3716XS
Stock: 0
16' Extra Strong - Bright Silver Finish - Outrigger Poles
Online
$834.38for Each
Mfr PN: AP3716XS
Stock: 0

Lee's 16' Extra Strong Bright Silver Standard Poles Sidewinder Lee's 16' Extra Strong Bright Silver Standard Poles Sidewinder
Online
$795.81for Each
Mfr PN: AP3916XS
Stock: 1
16' Extra Strong Bright Silver Standard Poles Sidewinder

Pole fits Lee Sidewinder holders with a 1-5/8" ID. 16'. Extra strong, aluminum. Bright silver finish with black spike.
Online
$795.81for Each
Mfr PN: AP3916XS
Stock: 1

Lee's 16' Extra Strong Poles Bright Silver Sidewinder Only Lee's 16' Extra Strong Poles Bright Silver Sidewinder Only
Online
$1128.60for Each
Mfr PN: SX3916XS
Stock: 0
16' Extra Strong Poles Bright Silver Sidewinder Only

Lee's Tackle Sidewinder 16' Extra Strong Step Tube outrigger poles - Bright Silver Finish with Black Spike. These outrigger poles have a sleek tappered section.

Online
$1128.60for Each
Mfr PN: SX3916XS
Stock: 0

Lee's 18.5' Bright Silver MKII Outrigger Poles 2" OD Lee's 18.5' Bright Silver MKII Outrigger Poles 2" OD
Online
$877.80for Each
Mfr PN: AP3519
Stock: 1
18.5' Bright Silver Finish - MKII Outrigger Poles
Online
$877.80for Each
Mfr PN: AP3519
Stock: 1

Lee's 18.5' Bright Silver Outrigger Poles for 1 3/4" Bases Lee's 18.5' Bright Silver Outrigger Poles for 1 3/4" Bases
Online
$906.74for Each
Mfr PN: AP3718 -1 3/4
Stock: 0
18.5' Bright Silver Finish - Outrigger Poles
Online
$906.74for Each
Mfr PN: AP3718 -1 3/4
Stock: 0

Lee's 18.5' Bright Silver Pole w/Black Spike Step Tube 1.5" Lee's 18.5' Bright Silver Pole w/Black Spike Step Tube 1.5"
Online
$576.55for Each
Mfr PN: MX8718CR
Stock: 3
18.5' Bright Silver Pole w/Black Spike Step Tube 1.5"

18.5' bright silver pole with black spike step tube 1.5"
Online
$576.55for Each
Mfr PN: MX8718CR
Stock: 3

Lee's 19' Extra Strong Bright Silver Outrigger Poles 2" OD Lee's 19' Extra Strong Bright Silver Outrigger Poles 2" OD
Online
$1017.66for Each
Mfr PN: AP3519XS
Stock: 2
19' Extra Strong - Bright Silver Finish - Outrigger Poles
Online
$1017.66for Each
Mfr PN: AP3519XS
Stock: 2

Lee's 2" Flush Mount Skiff Series Outrigger Holder Lee's 2" Flush Mount Skiff Series Outrigger Holder
Online
$920.76for Each
Retail $1050.00
Mfr PN: OH219F
Stock: 0
Gunnel Mount Outrigger Holders

Size: 2.0"
Dimensions: 4 x 6 1/2

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$920.76for Each
Retail $1050.00
Mfr PN: OH219F
Stock: 0

Lee's 2" Side Mount Skiff Series Outrigger Holder Lee's 2" Side Mount Skiff Series Outrigger Holder
Online
$920.76for Each
Retail $1050.00
Mfr PN: OH2020S
Stock: 0
Side Mount Outrigger Holders

OH2020S

Size: 2.0"
Dimensions: 4 3/4 x 7 1/2

Side Mount Bracket utilizes same curved tube as Gunnel Mount. One piece Bracket construction. Tube, Feet and Bar-Pin are all cast simultaneously for the ultimate in strength. Unit provides same three positions as Flush Mount. Same rugged Chrom on Brass Cosntruction.

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$920.76for Each
Retail $1050.00
Mfr PN: OH2020S
Stock: 0

Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder - 2" x 9" - Medium Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder - 2" x 9" - Medium
Online
$142.09for Each
Retail $160.00
Mfr PN: RH5365
Stock: 8
Swivel Base Flush Mount Rod Holder
Part #: RH-5365SS
Medium 30 Stainless Steel

Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.
Online
$142.09for Each
Retail $160.00
Mfr PN: RH5365
Stock: 8

Lee's 30(o) Stainless Steel Bar Pin Rod Holder - 2" O.D Lee's 30(o) Stainless Steel Bar Pin Rod Holder - 2" O.D
Online
$99.87for Each
Retail $107.50
Mfr PN: RH525SS/XS
Stock: 0
Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-525SS/XS Medium 30°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.


Online
$99.87for Each
Retail $107.50
Mfr PN: RH525SS/XS
Stock: 0

Lee's 30(o) Stainless Steel Flush Mount Rod Holder - 2.25" O.D Lee's 30(o) Stainless Steel Flush Mount Rod Holder - 2.25" O.D
Online
$111.64for Each
Retail $115.00
Mfr PN: RH530SS
Stock: 0
Flush Mount Rod Holder

RH-530 Large 30° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
Online
$111.64for Each
Retail $115.00
Mfr PN: RH530SS
Stock: 0

Lee's 30(o) Stainless Steel Swivel Base Flush Mount Rod Holder - Medium - 2" OD X 6.5" Tube f/Small Bent Butts Lee's 30(o) Stainless Steel Swivel Base Flush Mount Rod Holder - Medium - 2" OD X 6.5" Tube f/Small Bent Butts
Online
$133.97for Each
Retail $156.00
Mfr PN: RH5165
Stock: 6
RH5165

Standard Angle 30° Short Tube

Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$133.97for Each
Retail $156.00
Mfr PN: RH5165
Stock: 6

Lee's 30(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube Lee's 30(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 10.5" Tube
Online
$166.45for Each
Retail $179.50
Mfr PN: RH575
Stock: 6
Swivel Base Rod Holders

RH575

Standard Angle 30°

Stainless Steel Flush Mount w/ Swivel Base

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$166.45for Each
Retail $179.50
Mfr PN: RH575
Stock: 6

Lee's 30(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 14.5" Tube Lee's 30(o) Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 14.5" Tube
Online
$184.72for Each
Retail $195.00
Mfr PN: RH575XL
Stock: 6
Swivel Base Rod Holders

RH575XL

Standard Angle 30°

Stainless Steel Flush Mount w/ Swivel Base Extra Long

This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Online
$184.72for Each
Retail $195.00
Mfr PN: RH575XL
Stock: 6

Lee's Clamp-On Light Bracket - 1.050" Pipe Lee's Clamp-On Light Bracket - 1.050" Pipe
Online
$85.25for Each
Mfr PN: LT5201
Stock: 0
Clamp-On Accessory

Fits: 1.050" Pipe
Mounts: Horizontal/Vertical
Finish: Silver

Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.

Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
Online
$85.25for Each
Mfr PN: LT5201
Stock: 0

Lee's Clamp-On Light Bracket - 1.900" Pipe Lee's Clamp-On Light Bracket - 1.900" Pipe
Online
$85.25for Each
Mfr PN: LT5204
Stock: 3
Clamp-On Accessory

Fits: 1.900" Pipe
Mounts: Horizontal/Vertical
Finish: Silver

Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.

Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.

Online
$85.25for Each
Mfr PN: LT5204
Stock: 3

Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Online
$113.26for Each
Retail $125.00
Mfr PN: RA5201BK
Stock: 0
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe

Color:Black
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount:Horizontal

JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Online
$113.26for Each
Retail $125.00
Mfr PN: RA5201BK
Stock: 0

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.