Shop by Brand: BTI

Combining the Ultra Jags and Best Bore Brushes into one convenient 26-piece set gives you the ultimate storage system for your brushes and jags.

Neatly organized in a durable, hinged box with marked cavities, it's easy to select the correct jag and brush for your particular application. Because they are caliber-specific, you can be assured of an optimum fit to your firearm's bore for efficient and thorough cleaning. 17 to 45 caliber (does not include 20 caliber). All jags and brushes have 8-32 threads (17 caliber has 5- 40 threads and is a standard bore brush).

The Wheeler 30 Piece SAE/Metric/Hex/Torx P-handle Driver Set provides a molded stand that can sit on a bench or has mounting holes on the back to hang on a wall saving bench space. Includes 10 Metric Bits, 10 SAE Bits, and 10 Torx Bits. The Metric Bits include standard-1.5mm, ball-2mm, ball-2.5mm, ball-3mm, ball-4mm, ball-5mm, ball-6mm, ball-7mm, ball-8mm, ball-10mm. SAE Bits include standard-3/32in, standard-7/64in, ball-1/8in, ball-9/64in, ball-5/32in, ball-3/16in, ball-7/32in, ball-1/4in, ball-5/16in ball-3/8 in Torx Bits include T7, T8, T9, T10, T15, T20, T25, T27, T30, T40.

Keeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope, even just a couple of degrees, can cause error in point of impact. With modern "Drop-Compensating" scopes, an Anti-Cant Indicator is a necessity. If your gun isn't aligned correctly dialing up the turrets, or using hold-over marks, will just throw your shot off. This error can easily be enough to cause misses. The Wheeler Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical, eliminating any chance for "Cant Error" to cause a miss.

Features:

- Indicates precise, repeatable level gun position
- Increases accuracy by insuring proper gun alignment, which is critical for turret adjustment and hold over for bullet drop compensation
- Easy-to-view from shooting position
- Attaches to scope, folds in when not in use
- Precision machined aluminum with anodized finish

Keeping your scope perfectly aligned is critical to long-range accuracy and the Wheeler Anti-Cant Indicator is a pivotal tool for ensuring your rifles accuracy. Canting your scope, even just a couple of degrees, can cause error in point of impact. With modern "Drop-Compensating" scopes, an Anti-Cant Indicator is a necessity. If your gun isn't aligned correctly dialing up the turrets, or using hold-over marks, will just throw your shot off. This error can easily be enough to cause misses. The Wheeler Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical, eliminating any chance for "Cant Error" to cause a miss.

Features:

- Indicates precise, repeatable level gun position
- Increases accuracy by insuring proper gun alignment, which is critical for turret adjustment and hold over for bullet drop compensation
- Easy-to-view from shooting position
- Attaches to Picatinny rail, folds in when not in use
- Precision machined aluminum with anodized finish

A rifle's accuracy is dependent on the fit of its barreled action to its stock. Bedrock makes your rifle's stock and metal components fit together to eliminate shift and pressure points caused by recoil and changes in temperature and humidity. Removing the contact points of the stock where the barreled action meets, and replacing them with Bedrock assures you of a perfect, stress-free fit. The stock and barreled action becomes a unit, not just two components fitting arbitrarily together. Kit can generate approx 1.5 cups volume of bedding material.

With a 24-hour cure, you're only a day away from a perfect fit and a more accurate rifle. For use with wood or synthetic stocks, 30 minute working time, 24-Hour Full Cure.

Kit Includes:

- 4 oz. Bedrock (2 oz. resin, 2 oz. hardener)
- Brown & Black dye for wood or synthetic gunstocks
- 2 fl. oz. Microballoons
- 3 Mixing Cups
- 3 Mixing/Applicator Sticks
- Release Agent
- 2 Release Agent Applicators
- Modeling Clay
- Surgical Tubing
- Illustrated Instruction Booklet

Wheeler Engineering's Cerama-Coat is a spray-on metal finish that brings life to old guns without expensive airbrushes or painting equipment.

This one-can solution is the toughest metal finish available. This is an ultra-modern formula that contains a ceramic matrix, giving the finish ultimate durability, wear-resistance, and protection against rust and solvents. The matte black color won't spook game and looks great on any gun.

Applying Cerama-Coat is easy!

- Degrease the item to be coated
- Shake the Cerama-Coat can vigorously
- Spray the parts with three light coats of finish
- Bake the part in an oven at 350 degrees for 1 hour to cure the finish

... and you'll have a finish ready to take the very worst that mother nature can dish out. Each can contains enough to refinish two long guns.

Lapping a receiver ensures a perfectly square and true surface for the barrel to mate against, thus enhancing accuracy. Also, honing the surface can produce optimal positioning of barrel nut so ideal torque can be achieved along with proper gas tube hole alignment.

Features:

- Use with a battery powered or electric drill to square the receiver face on an AR-15
- Helps align the gas tube through the barrel nut holes
- Helps align front and rear A2 style sights
- Flex Driver Shaft
- 220 Grit Lapping Compound
- Steel Construction
- Black Oxide Finish

Wheeler AR Trigger Guard Install Tool

Features:

- Makes installing or changing trigger guards quick and easy
- Comes with an install pin and an un-install pin
- Pins conveniently store in the frame
- Precisely control and install the trigger guard roll pin to prevent damage to the receiver
- The old method of hammering the roll pin into the receiver can easily damage your serialized lower
- Durable construction, made of aluminum with a mil-spec anodized finish

The simplest, most accurate scope leveling system ever devised.

Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. The Level-Level-Level works because the scope is leveled to your receiver, not to the top of a scope base.

The makers of some scope leveling devices tell you that leveling your scope to the top of the base produces a level scope. Don't believe it! An accurate rifle requires level crosshairs, and the Level-Level-Level gives you the means to level your scope perfectly in only minutes.

Level your scope as you mount it on your rifle. The magnetic base in the rifle level bridges the bolt raceway, allowing you to position your rifle perfectly level. Then level the scope, tighten the rings, and the job is done.

Works with practically any bolt-action rifle, and is adaptable to other designs.

Precision machined unit
Designed in install, un-install or adjust front and rear dovetail sights
Fully captures and supports slide so it won?t deform
Works on all semi auto pistols
Large 4 post drive knob to easily push the sight
Reference marks for precise adjustments

Wheeler AR Bolt Catch Install Punch Kit

Features:

- Start bolt catch roll pin easily with starter punch
- Finish installation flush with the finishing punch
- Flat on one side for proper alignment

Wheeler's Digital F.A.T. Wrench brings even more precise torque settings to the handheld torque wrench market. This amazing digital handheld torque wrench lets you apply repeatable, accurate torque settings to your scope rings, bows and other screws. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in/lbs. will aid in accuracy of all your screws and decreases the opportunity for problems in the field. The FAT Wrench Bits are built to last and are made from S2 Tool steel and hardened to 56-56 Rockwell "e;C"e;.



Ergonomic over molded design
Large LCD Digital display for ease of viewing
15 -100 in/lb. range
+/- 2% accuracy
Audible indicator tone
Visual indicator
Low battery indicator
Soft touch buttons
Injection molded storage case

FAT Wrench® with 10 Bit Set
Wheeler's FAT Wrench® brings perfect consistency to every screw on your rifle!

This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.

The FAT Wrench® is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

Patent: www.btibrands.com/patents

Torque adjustments range from 10 inch pounds to 65 inch pounds
Accuracy plus/minus 2 inch pounds
1/4"e; drive

Plastic Case Included

Bits Included: (click to order bit packs)

Leupold/Buehler windage bit
#10 flat blade bit
#11 flat blade bit
#32 flat blade bit
3/32"e; Allen bit
7/64"e; Allen bit
5/32"e; Allen bit
T15 Torx bit
T20 Torx bit
Square drive adapter bit


Length: 6"e;
Torque Adjustment Range: 10 inch lbs to 65 inch lbs
Quantity of Bits Included: 9
Drive Size: 1/4"e;
Accuracy: +/- 2 inch-lbs

89 Piece Professional Gunsmithing Screwdriver Set
Screwdrivers are the most important and most-used gunsmithing tools.

Wheeler's® Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set, and Wheeler's are the finest available. They're made from S2 tool steel and hardened to 56-58 Rockwell "e;C."e; Unlike other screwdriver suppliers,Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation.

Keep your gun looking and operating as good as new!

Avoid costly damage that ruins the look and value of your guns!

Whether you're working on a Browning Superposed, a Remington 700, a Smith & Wesson® revolver, or a Colt Single Action, you'll find that there's a bit to fit every screw on your gun. The 54 Hollow-ground flat bits range in size from .120?x.020? to .360?x.070?, and includes doubles in the thinnest sizes. (Any gunsmith will tell you that you're occasionally going to break the ultra-thin bits on stubborn screws. This set includes two each of the very thinnest bits, which means you'll never be stuck in the middle of a job without the proper bit. Replacement bits are available in three packs for a very modest price.)

The set also includes a complete selection of Phillips, Allen, and Torx bits to cover scope rings, bases, recoil pads, and the like. The difference in the "e;basic set"e; and the "e;professional set"e; lies in the 15 ingenious "e;specialty bits"e; that are included in the "e;professional"e; set. These 15 pieces include all of the bits pictured below. These bits are great for installing scope bases, getting you out of a pinch by providing a small pin punch when you really need it, and keeping once-in-a-while lifesaver tools at your fingertips.

Both sets come with two handles made from comfortable overmolded plastic. The first is a regular size handle that's good for most jobs, and the second is a slimmer, shorter "e;Close Quarters"e; handle that is good for finesse work with smaller bits.

Both sets also come in a durable custom box that's ready for the bench or your range kit.


Product Specifications

Case Size: 8"e;x12"e;x3"e;
Bit Material: S2 Tool Steel
Bit Hardness: 56-58 Rockwell C
Driver Handles: 2, with magnets
Extension: 1, 3? with magnet
Adapter: 1 Hex to square drive
Flat Bits: 54 Hollow-Ground
Allen Bits: 8
Phillips Bits: 4
Torx Bits: 3
Specialty Bits: 15

Professional Laser Bore Sighter Green

The Professional Laser Bore Sighter uses a high power daylight visible green laser and a high-strength magnetic connection to the barrel to deliver fast accurate bore sighting.

This system works with virtually all firearms; rifles, shotguns, handguns. The magnetic connection to the end of the muzzle provides more precise alignment with the bore without the risk of damaging the bore, compared to arbor style bore devices. A machined aluminum body with soft rubber over-molding houses the laser module.

Each unit is hand tuned during the manufacturing process with an innovative calibration mechanism. This allows for maximum precision, thus ensuring the best bore/optic alignment possible. Once precision calibration is completed the laser module is permanently secured in place insuring reliable performance and durability.

Molded plastic storage case included. Runs on a single Lithium 123A battery (included).

Makes initial scope adjustment simple, fast and precise
Compatible with a wide variety of guns
High power daylight visible green laser

Technological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system's scope is critical to realizing the accuracy. A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur.

The Wheeler® Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.

The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

Precision tool for scope reticle alignment Factory calibrated Reference Level
Maximize accuracy potential Tunable Barrel Clamp Level
CNC machined aluminum level housings Protective storage case

Wheeler Master Roll Pin Punch Set includes the Roll Pin Starter Set and the Ball Profile Roll Pin Punch Set with a gunsmithing hammer in one comprehensive kit. Machined and hardened from steel to prevent bending or breaking while driving roll pins. Designed with a ball profile tip to provide proper alignment of the roll pin and prevent damage to the firearm or roll pin. The 9 piece set includes: 5/16,G+- 1/4,G+- 7/32,G+- 3/16,G+- 5/32,G+-1/8,G+- 3/32,G+- 5/64,G+- 1/16". Keeps punch from walking off pin. Knurled handles. Roll Pin Starter Set is machined and hardened from steel to prevent bending or breaking while starting roll pins. Designed with a counter-bored tip to properly align and start the roll pin, preventing damage to the firearm. The 9 piece set includes: 5/16,G+- 1/4,G+- 7/32,G+- 3/16,G+-5/32,G+- 1/8,G+- 3/32,G+- 5/64,G+- 1/16G+-. Knurled handles. Small Hammer (6oz) for precise control and smaller roll pins. Steel Head G+( For metal punches and surfaces. Brass Head G+( For preventing marring.

Likely to become your favorite hammer at the bench or on the range. Nylon face is non-marring and is great for alignment and other uses where a steel hammer is not appropriate. Brass face can be used for driving pins and punches, and a multitude of other uses.

Specifications:

- Size: 11" overall
- Weight: 8 oz.

The Wheeler Engineering 2 Piece Pic Rail Scope Rings are the perfect addition to your weapon. With a six-hole design, these rings are capable of being tightened more securely and come in many different sizes to ensure the right fit. With an adjustable anti-cant indicator and heavy-duty aluminum construction, these rings are ready for all situations.

The Wheeler Picatinny Scope Rings 2 piece 1 inch Medium feature drastically increased clamping force can be applied with a 6 hole version of rings. The retained lock nut securely attaches to pic rail. It features integrated anti-cant level swing out and flat top on ring for leveling. It also has the ability to position anti-cant indicator on the rear ring or the front ring. These scope rings feature 6061 aluminum construction.

The Wheeler Picatinny Scope Rings 2 piece 30mm Medium feature drastically increased clamping force can be applied with a 6 hole version of rings. The retained lock nut securely attaches to pic rail. It also features an integrated anti-cant level swing out and flat top on ring for leveling with the ability to position anti-cant indicator on the rear ring or the front ring. These scope rings feature 6061 aluminum construction.

Screwdrivers are the most important and most-used gunsmithing tools. Wheeler's Deluxe Gunsmithing Screwdriver Sets belong on every gunsmithing bench. The well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. These bits are made from S2 tool steel and hardened to 56-58 Rockwell C. Unlike other screwdriver suppliers, Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that every bit was offered for every situation. Whether you're working on a Browning Superposed, a Remington 700, a Smith & Wesson revolver, or a Colt single action, you'll find that there's a bit to fit every screw on your gun. Any gunsmith will tell you that you're occasionally going to break the ultra-thin bits on stubborn screws. The 89 and 72 Piece sets include two each of the very thinnest bits, which means you'll never be stuck in the middle of a job without the proper bit. The sets also include a complete selection of Phillips, Allen, and Torx bits to cover scope rings, bases, recoil pads, and the like. The difference in the 72 piece and the 89 piece set lies in the 15 ingenious "specialty bits" that are included in the 89 piece set. These bits are great for installing scope bases, getting you out of a pinch by providing a small pin punch when you really need it, and keeping once-in-a-while lifesaver tools at your fingertips.

Features:

- Great addition to the 72 or 89 piece Screwdriver Sets
- Hollow ground flat bits
- Durable S2 tool steel
- Features plastic storage tray
- 1/2" x 1/4" socket driver
- 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 4.5mm 5mm, 5.5mm, 6mm, 7mm, and 8mm Hex Bits
- T6, T7, T8, T9, T10, T15, T20, T27, T30 Torx Bit

The Wheeler Engineering Roll Pin Punches are machined from hardened steel to prevent bending or breaking while driving in any size roll pin. These punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16", 1/4", 7/32", 3/16", 5/32", 1/8", 3/32", 5/64", 1/16" punches in a nylon pouch.

Aligning and lapping of rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range.

The lapping bar is used to lap the rings to improve alignment, reduce stress on the scope and improve the grip of the rings on the scope. It also serves as a lever to rotate dovetail rings into place. Lapping the rings can also minimize or prevent ring marring of the scope.

Kit includes:

- Two 30mm alignment bars
- 30mm lapping bar
- Lapping bar handle
- 220 grit lapping compound
- Complete instructions

The Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It's also the perfect size to include on your trips to the range and the field.

Included with the standard, Phillips, hex, and torx bits, is a 2" long #2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments.

The magnetic handle is perfectly sized for gunsmithing needs, and is also hollow-handled, allowing you to carry a variety of bits should the need arise.

The Wheeler Trigger Pull Scale accurately measures trigger pull weight from 8 ounces to 8 pounds. It features an ergonomically shaped handle for consistent direction of pull. Highly visible increment markings and easy to read sliding indicator that stays on the maximum weight registered make it easy to read. It measures in 2 ounce increments and is accurate to +/- 2 oz.

The trigger pull scale is an excellent tool for use when adjusting triggers to ensure accuracy and maintain safe performance.

Features:

- Accurately measures trigger pull weight
- Easy to read sliding indicator
- Weight Range: 8 oz. to 8 lb. (2 oz. increments)
- Frame Material: Molded plastic
- Package Size: 4.5" wide x 14.75" high x 1.25" deep

The Wheeler Engineering Universal Barrel Clamp is precision extruded from aircraft grade aluminum and bonded with non-marring urethane. The urethane coating is specially designed to provide a protective layer for the barrels finish while providing extraordinary gripping abilities. Three different barrel openings of .85, .66 and .53 will accommodate anything from an AR pencil barrel up to a bull barrel. When inserted in a vise the urethane coating squeezes down tightly on the barrel to fully secure it for the forces needed for installation/removal.

Specifications:

- Three different barrel openings of .85", .66" and .53"